Cloud Nine PCBs
So far we've never come across a failed circuit board. They are well made with decent screw terminals for connecting the wires with.
Here are some pictures:
Non Switch Side
The temperature on Cloud 9s can be calibrated using the two variable resistors:
- 'SVR1' adjusts the switch-side temperature
- 'SVR2' adjusts the non switch side side temperature
Cloud 9s have a variable temperature setting. When the LED's show 150c the actual temperature is normally within 0.5 degC on each plate once the heaters have been calibrated. At 200 degC the temperature is usually about 195c and 'High' is about 205c.
The information provided on this website is intended for use by people competent at repairing electrical products. If you are not confident about carrying out a safe and reliable repair, please consider our repair service. To state the obvious... Irons repaired incorrectly can be very dangerous!
This page was last updated at 11:13pm on 17th January 2015
All content © Fogma Ltd 2013-2019. Website Terms & Conditions
We are an independent company and are not associated with Cloud9 whatsoever. More...