• 160 Ohm Heater with Thermal Fuse

A 160 ohm heater preassembled with a thermal fuse.

This is suitable for:

  • C9-M1.0 and C9-M1.1 irons that were factory fitted with 160 ohm heaters
  • C9-L1.0 and C9-L1.1 irons that were factory fitted with 160 ohm heaters
  • C9-M1.2 and C9-L1.2 irons that were factory fitted with 160 ohm heaters wired in series with a thermal fuse

We highly recommend checking exactly what heaters were fitted to your C9 irons, as there are quite a few possibilities and it is not possible to tell without taking them apart!

All heater resistance values are nominal. Heater resistances can vary plus/minus 10 ohms however this is normal and does not affect operation.

You may need to calibrate with SVR1 and SVR2 once fitted

TIP! Replace BOTH sides!!


Items may be returned (in original condition) for refund, less original postage

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

160 Ohm Heater with Thermal Fuse

160ohm_with_fuse
2024-09-19
  • Brand: Compatible Part
  • Product Code: 160ohm_with_fuse
  • Availability: In Stock
GBP
  • 9.99

    £9.99